• Burning oil flare
    “A flowrate analysis saved one refinery $473,000 in one year.”

    Our Solutions

    We offer the widest range of scanning and tracer diagnostic services on the market. Proven in thousands of plants and facilities around the world they save our customers millions of dollars every year.

  • Upstream O&G
    "Assess the performance of a separator train, increasing production and lowering production cost"

    Our Solutions

    We offer the widest range of scanning and tracer diagnostic services on the market. Proven in thousands of plants and facilities around the world they save our customers millions of dollars every year.

  • Distillation Towers
    “Higher feed rates were achieved thanks to a Tru-Scan™”

    Our Solutions

    We offer the widest range of scanning and tracer diagnostic services on the market. Proven in thousands of plants and facilities around the world they save our customers millions of dollars every year.

Trayed Towers Tru-Scan

Trayed Towers

We provide actionable information while the system is online
and operating in normal, test or upset conditions.
A Tru-Scan™ diagnosis will provide you better insight into
tray flooding, weeping and internal damage.

Our patented FrothView™ technology offers another level of
detail, measuring the actual froth height on individual trays,
locating bottlenecks and optimising performance.

Watch Video
Fact Sheet
Tru-Scan™ Fact Sheet
Answers any questions you may have on trayed towers.
Case Study
Case Study #1
On-spec production achieved at higher feed rates.
Case Study
Case Study #2
Quantitative tray capacity identified for optimised performance.
Case Study
Case Study #3
Cost of emergency shutdown and replacement equipment saved.
Case Study
Case Study #4
Tru-Scan™ assists ethanol customer with tray fouling issues.
Case Study
Case Study #5
Tru-Scan™ results identify exact location of down trays.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
Tru-Grid™ Scan Factsheet
Answers any question you may have on packed bed towers.
Case Study
Case Study #1
Scans identify the best wash oil rate for good liquid distribution.
Case Study
Case Study #2
Tru-Grid™ Scans identify damaged packing and confirm a shutdown was necessary.
Case Study
Case Study #3
Column performance improved after a Tru-Grid™ Scan identifies out of place distributor.
Case Study
Case Study #4
ThruVision™ Scan confirmed liquid maldistribution problem due to an error in a distributor installation.
Heat Exchangers

Heat Exchangers

Tracerco has been at the forefront of online
leak detection for the last 50 years and can
detect leaks from 0.5% to as low as 1ppm.
If you have a leak, we can identify the specific
exchanger where it's happening.

Watch Video
Fact Sheet
Tracerco Diagnostics™ Leak Study Fact Sheet
Answers any questions you may have on heat exchanger applications.
Case Study
Case Study #1
Identification of popcorn polymer prevented a possible environmental or safety incident.
Case Study
Case Study #2
Exchanger leak detection improved naphtha quality with minimal downtime.
Case Study
Case Study #3
Leak detection identified source of high sulphur level reducing outage time.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
ThruPipe™ Fact Sheet
Answers any questions you may have on piping systems.
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Case Study
Case Study #1
Isolating the source of flare flow resulted in a savings up to $335K.
Tanks

Tanks

Scans on tanks and spheres gives you a clear
picture of hydrocarbon, water and emulsion
levels and determine if there is any sludge or
plugged vent lines. They'll help you understand
how much effective capacity you are using and
let you schedule the optimum time for cleaning.

Watch Video
Fact Sheet
PHASEFINDER™ SCAN FACTSHEET
Answers any questions you may have on tanks and spheres.
Case Study
Case Study #1
Deposits identified were more likely solids in suspension and not a static solids layer.
Reactor

Reactors

Discover why you are losing catalyst, and understand
which parts of your reactor are not operating efficiently.
Our Tru-Scan™ technology generates a density profile of a
reactor's internals, including distributors, beds and
collectors whilst a Tracerco Diagnostics™ Distribution Study
will give you a more detailed assessment of performance.

Watch Video
Fact Sheet
TRU-SCAN™ FACT SHEET
Answers any questions you may have on reactors.
Case Study
Case Study #1
Online distribution investigation identified the causes of poor reactor performance.
Case Study
Case Study #2
Maldistribution confirmed to be the cause of lower than expected conversion.
FCCU

FCCU

We can help you gain valuable insights into the catalyst
and fluid behaviour inside your Fluid Catalytic Cracking
Unit (FCCU) whilst it’s still online. Our tracer and
scanning solutions measure density profiles within
vessels as well as the velocity, distribution and
residence time of the catalyst or vapour phase through
any part of the system so you can improve productivity,
identify problems and plan maintenance efficiently.

Watch Video
Fact Sheet
TRACERCO DIAGNOSTICS™ FCCU STUDY
Answers any questions you may have on FCCU.
Case Study
Case Study #1
A Tru-Scan™ of a FCC Reactor and Regenerator provided valuable insight on plugged cyclones and catalyst bed levels.
Case Study
Case Study #2
Flow parameters around regenerator and mechanical damage confirmed.
Case Study
Case Study #3
ThruVision™ scans of a reactor riser were used to determine the uniformity of distribution and identify flow inefficiencies.
Case Study
Case Study #4
Distribution studies on an FCC stripper were used to identify problematic operations and in turn increase efficiency.
Oil and Gas Separator

Separators

A Tracerco Diagnostics™ Separator study can be used to detect oil in
water, water in oil, gas undercutting, or liquid carryover. It can also identify
the effect of blockages in perforated plates, flow distribution and accurately
measure individual phase residence times,  so you can increase production
rates and lower production costs.

Watch Video
Fact Sheet
Separators Fact Sheet
Answers any question you may have on Separators.
Case Study
Case Study #1
Optimum demulsifier chemical identified and emulsion removed.
Desalter vessel

Desalters

Tracerco’s technologies applied to desalters can provide
considerable operational cost savings through the optimisation
of emulsion and asphaltene reducing chemicals. Our technology
provides real-time measurement of interface levels between
different phases including oil, emulsion, water and solids/sludge
for a better understanding of performance.

Watch Video
Fact Sheet
DESALTER SCAN FACTSHEET
Answers any questions you may have on desalters.
Trayed Towers Tru-Scan

Trayed Towers

We provide actionable information while the system is online
and operating in normal, test or upset conditions.
A Tru-Scan™ diagnosis will provide you better insight into
tray flooding, weeping and internal damage.

Our patented FrothView™ technology offers another level of
detail, measuring the actual froth height on individual trays,
locating bottlenecks and optimising performance.

Watch Video
Fact Sheet
Tru-Scan™ Fact Sheet
Answers any questions you may have on trayed towers.
Case Study
Case Study #1
On-spec production achieved at higher feed rates.
Case Study
Case Study #2
Quantitative tray capacity identified for optimised performance.
Case Study
Case Study #3
Cost of emergency shutdown and replacement equipment saved.
Case Study
Case Study #4
Tru-Scan™ assists ethanol customer with tray fouling issues.
Case Study
Case Study #5
Tru-Scan™ results identify exact location of down trays.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
Tru-Grid™ Scan Factsheet
Answers any question you may have on packed bed towers.
Case Study
Case Study #1
Scans identify the best wash oil rate for good liquid distribution.
Case Study
Case Study #2
Tru-Grid™ Scans identify damaged packing and confirm a shutdown was necessary.
Case Study
Case Study #3
Column performance improved after a Tru-Grid™ Scan identifies out of place distributor.
Case Study
Case Study #4
ThruVision™ Scan confirmed liquid maldistribution problem due to an error in a distributor installation.
Heat Exchangers

Heat Exchangers

Tracerco has been at the forefront of online
leak detection for the last 50 years and can
detect leaks from 0.5% to as low as 1ppm.
If you have a leak, we can identify the specific
exchanger where it's happening.

Watch Video
Fact Sheet
Tracerco Diagnostics™ Leak Study Fact Sheet
Answers any questions you may have on heat exchanger applications.
Case Study
Case Study #1
Identification of popcorn polymer prevented a possible environmental or safety incident.
Case Study
Case Study #2
Exchanger leak detection improved naphtha quality with minimal downtime.
Case Study
Case Study #3
Leak detection identified source of high sulphur level reducing outage time.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
ThruPipe™ Fact Sheet
Answers any questions you may have on piping systems.
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Case Study
Case Study #1
Isolating the source of flare flow resulted in a savings up to $335K.
Tanks

Tanks

Scans on tanks and spheres gives you a clear
picture of hydrocarbon, water and emulsion
levels and determine if there is any sludge or
plugged vent lines. They'll help you understand
how much effective capacity you are using and
let you schedule the optimum time for cleaning.

Watch Video
Fact Sheet
PHASEFINDER™ SCAN FACTSHEET
Answers any questions you may have on tanks and spheres.
Case Study
Case Study #1
Deposits identified were more likely solids in suspension and not a static solids layer.
Reactor

Reactors

Discover why you are losing catalyst, and understand
which parts of your reactor are not operating efficiently.
Our Tru-Scan™ technology generates a density profile of a
reactor's internals, including distributors, beds and
collectors whilst a Tracerco Diagnostics™ Distribution Study
will give you a more detailed assessment of performance.

Watch Video
Fact Sheet
TRU-SCAN™ FACT SHEET
Answers any questions you may have on reactors.
Case Study
Case Study #1
Online distribution investigation identified the causes of poor reactor performance.
Case Study
Case Study #2
Maldistribution confirmed to be the cause of lower than expected conversion.
Oil and Gas Separator

Separators

A Tracerco Diagnostics™ Separator study can be used to detect oil in
water, water in oil, gas undercutting, or liquid carryover. It can also identify
the effect of blockages in perforated plates, flow distribution and accurately
measure individual phase residence times,  so you can increase production
rates and lower production costs.

Watch Video
Fact Sheet
Separators Fact Sheet
Answers any question you may have on Separators.
Case Study
Case Study #1
Optimum demulsifier chemical identified and emulsion removed.
Trayed Towers Tru-Scan

Trayed Towers

We provide actionable information while the system is online
and operating in normal, test or upset conditions.
A Tru-Scan™ diagnosis will provide you better insight into
tray flooding, weeping and internal damage.

Our patented FrothView™ technology offers another level of
detail, measuring the actual froth height on individual trays,
locating bottlenecks and optimising performance.

Watch Video
Fact Sheet
Tru-Scan™ Fact Sheet
Answers any questions you may have on trayed towers.
Case Study
Case Study #1
On-spec production achieved at higher feed rates.
Case Study
Case Study #2
Quantitative tray capacity identified for optimised performance.
Case Study
Case Study #3
Cost of emergency shutdown and replacement equipment saved.
Case Study
Case Study #4
Tru-Scan™ assists ethanol customer with tray fouling issues.
Case Study
Case Study #5
Tru-Scan™ results identify exact location of down trays.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
Tru-Grid™ Scan Factsheet
Answers any question you may have on packed bed towers.
Case Study
Case Study #1
Scans identify the best wash oil rate for good liquid distribution.
Case Study
Case Study #2
Tru-Grid™ Scans identify damaged packing and confirm a shutdown was necessary.
Case Study
Case Study #3
Column performance improved after a Tru-Grid™ Scan identifies out of place distributor.
Case Study
Case Study #4
ThruVision™ Scan confirmed liquid maldistribution problem due to an error in a distributor installation.
Heat Exchangers

Heat Exchangers

Tracerco has been at the forefront of online
leak detection for the last 50 years and can
detect leaks from 0.5% to as low as 1ppm.
If you have a leak, we can identify the specific
exchanger where it's happening.

Watch Video
Fact Sheet
Tracerco Diagnostics™ Leak Study Fact Sheet
Answers any questions you may have on heat exchanger applications.
Case Study
Case Study #1
Identification of popcorn polymer prevented a possible environmental or safety incident.
Case Study
Case Study #2
Exchanger leak detection improved naphtha quality with minimal downtime.
Case Study
Case Study #3
Leak detection identified source of high sulphur level reducing outage time.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
ThruPipe™ Fact Sheet
Answers any questions you may have on piping systems.
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Case Study
Case Study #1
Isolating the source of flare flow resulted in a savings up to $335K.
Tanks

Tanks

Scans on tanks and spheres gives you a clear
picture of hydrocarbon, water and emulsion
levels and determine if there is any sludge or
plugged vent lines. They'll help you understand
how much effective capacity you are using and
let you schedule the optimum time for cleaning.

Watch Video
Fact Sheet
PHASEFINDER™ SCAN FACTSHEET
Answers any questions you may have on tanks and spheres.
Case Study
Case Study #1
Deposits identified were more likely solids in suspension and not a static solids layer.
Oil and Gas Separator

Separators

A Tracerco Diagnostics™ Separator study can be used to detect oil in
water, water in oil, gas undercutting, or liquid carryover. It can also identify
the effect of blockages in perforated plates, flow distribution and accurately
measure individual phase residence times,  so you can increase production
rates and lower production costs.

Watch Video
Fact Sheet
Separators Fact Sheet
Answers any question you may have on Separators.
Case Study
Case Study #1
Optimum demulsifier chemical identified and emulsion removed.
Trayed Towers Tru-Scan

Trayed Towers

We provide actionable information while the system is online
and operating in normal, test or upset conditions.
A Tru-Scan™ diagnosis will provide you better insight into
tray flooding, weeping and internal damage.

Our patented FrothView™ technology offers another level of
detail, measuring the actual froth height on individual trays,
locating bottlenecks and optimising performance.

Watch Video
Fact Sheet
Tru-Scan™ Fact Sheet
Answers any questions you may have on trayed towers.
Case Study
Case Study #1
On-spec production achieved at higher feed rates.
Case Study
Case Study #2
Quantitative tray capacity identified for optimised performance.
Case Study
Case Study #3
Cost of emergency shutdown and replacement equipment saved.
Case Study
Case Study #4
Tru-Scan™ assists ethanol customer with tray fouling issues.
Case Study
Case Study #5
Tru-Scan™ results identify exact location of down trays.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
Tru-Grid™ Scan Factsheet
Answers any question you may have on packed bed towers.
Case Study
Case Study #1
Scans identify the best wash oil rate for good liquid distribution.
Case Study
Case Study #2
Tru-Grid™ Scans identify damaged packing and confirm a shutdown was necessary.
Case Study
Case Study #3
Column performance improved after a Tru-Grid™ Scan identifies out of place distributor.
Case Study
Case Study #4
ThruVision™ Scan confirmed liquid maldistribution problem due to an error in a distributor installation.
Heat Exchangers

Heat Exchangers

Tracerco has been at the forefront of online
leak detection for the last 50 years and can
detect leaks from 0.5% to as low as 1ppm.
If you have a leak, we can identify the specific
exchanger where it's happening.

Watch Video
Fact Sheet
Tracerco Diagnostics™ Leak Study Fact Sheet
Answers any questions you may have on heat exchanger applications.
Case Study
Case Study #1
Identification of popcorn polymer prevented a possible environmental or safety incident.
Case Study
Case Study #2
Exchanger leak detection improved naphtha quality with minimal downtime.
Case Study
Case Study #3
Leak detection identified source of high sulphur level reducing outage time.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
ThruPipe™ Fact Sheet
Answers any questions you may have on piping systems.
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Case Study
Case Study #1
Isolating the source of flare flow resulted in a savings up to $335K.
Tanks

Tanks

Scans on tanks and spheres gives you a clear
picture of hydrocarbon, water and emulsion
levels and determine if there is any sludge or
plugged vent lines. They'll help you understand
how much effective capacity you are using and
let you schedule the optimum time for cleaning.

Watch Video
Fact Sheet
PHASEFINDER™ SCAN FACTSHEET
Answers any questions you may have on tanks and spheres.
Case Study
Case Study #1
Deposits identified were more likely solids in suspension and not a static solids layer.
Trayed Towers Tru-Scan

Trayed Towers

We provide actionable information while the system is online
and operating in normal, test or upset conditions.
A Tru-Scan™ diagnosis will provide you better insight into
tray flooding, weeping and internal damage.

Our patented FrothView™ technology offers another level of
detail, measuring the actual froth height on individual trays,
locating bottlenecks and optimising performance.

Watch Video
Fact Sheet
Tru-Scan™ Fact Sheet
Answers any questions you may have on trayed towers.
Case Study
Case Study #1
On-spec production achieved at higher feed rates.
Case Study
Case Study #2
Quantitative tray capacity identified for optimised performance.
Case Study
Case Study #3
Cost of emergency shutdown and replacement equipment saved.
Case Study
Case Study #4
Tru-Scan™ assists ethanol customer with tray fouling issues.
Case Study
Case Study #5
Tru-Scan™ results identify exact location of down trays.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
Tru-Grid™ Scan Factsheet
Answers any question you may have on packed bed towers.
Case Study
Case Study #1
Scans identify the best wash oil rate for good liquid distribution.
Case Study
Case Study #2
Tru-Grid™ Scans identify damaged packing and confirm a shutdown was necessary.
Case Study
Case Study #3
Column performance improved after a Tru-Grid™ Scan identifies out of place distributor.
Case Study
Case Study #4
ThruVision™ Scan confirmed liquid maldistribution problem due to an error in a distributor installation.
Heat Exchangers

Heat Exchangers

Tracerco has been at the forefront of online
leak detection for the last 50 years and can
detect leaks from 0.5% to as low as 1ppm.
If you have a leak, we can identify the specific
exchanger where it's happening.

Watch Video
Fact Sheet
Tracerco Diagnostics™ Leak Study Fact Sheet
Answers any questions you may have on heat exchanger applications.
Case Study
Case Study #1
Identification of popcorn polymer prevented a possible environmental or safety incident.
Case Study
Case Study #2
Exchanger leak detection improved naphtha quality with minimal downtime.
Case Study
Case Study #3
Leak detection identified source of high sulphur level reducing outage time.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
ThruPipe™ Fact Sheet
Answers any questions you may have on piping systems.
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Case Study
Case Study #1
Isolating the source of flare flow resulted in a savings up to $335K.
Tanks

Tanks

Scans on tanks and spheres gives you a clear
picture of hydrocarbon, water and emulsion
levels and determine if there is any sludge or
plugged vent lines. They'll help you understand
how much effective capacity you are using and
let you schedule the optimum time for cleaning.

Watch Video
Fact Sheet
PHASEFINDER™ SCAN FACTSHEET
Answers any questions you may have on tanks and spheres.
Case Study
Case Study #1
Deposits identified were more likely solids in suspension and not a static solids layer.
Ammonia Converter

Ammonia Converters

Our tracer studies can identify operational problems
within an ammonia convertor whilst it’s on-line for better
shutdown and maintenance planning. It will help you
discover leaks or bypass in complex designs.

Watch Video
Fact Sheet
TRACERCO DIAGNOSTICS™ LEAK STUDY FACT SHEET
Answers any questions you may have on ammonia converters.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
ThruPipe™ Fact Sheet
Answers any questions you may have on piping systems.
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Case Study
Case Study #1
Isolating the source of flare flow resulted in a savings up to $335K.
Tanks

Tanks

Scans on tanks and spheres gives you a clear
picture of hydrocarbon, water and emulsion
levels and determine if there is any sludge or
plugged vent lines. They'll help you understand
how much effective capacity you are using and
let you schedule the optimum time for cleaning.

Watch Video
Fact Sheet
PHASEFINDER™ SCAN FACTSHEET
Answers any questions you may have on tanks and spheres.
Case Study
Case Study #1
Deposits identified were more likely solids in suspension and not a static solids layer.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™ 
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
TRU-GRID™ SCAN FACTSHEET
Answers any question you may have on packed bed towers.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications
Oil and Gas Separator

Separators

A Tracerco Diagnostics™ Separator study can be used to detect oil in
water, water in oil, gas undercutting, or liquid carryover. It can also identify
the effect of blockages in perforated plates, flow distribution and accurately
measure individual phase residence times,  so you can increase production
rates and lower production costs.

Watch Video
Fact Sheet
Separators Fact Sheet
Answers any question you may have on Separators.
Oil and Gas Separator

Separators

A Tracerco Diagnostics™ Separator study can be used to detect oil in
water, water in oil, gas undercutting, or liquid carryover. It can also identify
the effect of blockages in perforated plates, flow distribution and accurately
measure individual phase residence times,  so you can increase production
rates and lower production costs.

Watch Video
Fact Sheet
Separator Fact Sheet
Answers any question you may have on Separators.
Flare System

Piping / Flare Systems

We routinely provide flowrate, leak testing, pipe
scanning and meter calibration services. Fast,
accurate and cost effective, our technology will
help you determine the flow of vapour, carryover
of liquid, build-up of sludge and the amount of
fouling materials in flare lines.

Watch Video
Fact Sheet
TRACERCO DIAGNOSTICS™ FLOW STUDY FACT SHEET
Answers any questions you may have on flare system applications.
Packed Bed Tru-Grid Scan

Packed Bed Towers

One of the most common and cost effective methods to
monitor fouling or identify liquid maldistribution and
other problems affecting packed columns is our Tru-Grid™ 
Scan and PackView™ technology. Additional insights when
different phases are poorly distributed or solid build-up
has occurred can be obtained using our ThruVision™ scan.

Watch Video
Fact Sheet
TRU-GRID™ SCAN FACTSHEET
Answers any question you may have on packed bed towers.