|
TRACERCO™ PhaseGauge
Are you having a problem managing foams or emulsions within
your multi-phase production vessels?
Do you need to reduce the cost of your effect chemicals
by optimizing their use?
Is the presence of either foams or emulsions limiting your
production capacity?
The TRACERCO™ PhaseGauge could be the answer to all
of your measurement and control requirements.
 Utilizing
advanced measurement technology, the TRACERCO™ PhaseGauge
can accurately determine phases such as foams, emulsions,
or sand build-up in production vessels. The density measurement,
which is carried out over a range of 510mm, has a resolution
of 30mm and when incorporated into the control system can
be used to optimize the vessels’ performance.
Features of the TRACERCO™ PhaseGauge
- No moving parts
- Available for nozzles 3” and greater
- Tracerco SCADA package available
- Non-contact
- Temperature rated up to +125°C
- Suitable for zone 1 areas
Benefits provided by TRACERCO™ PhaseGauge
- Lower operating costs by optimizing effect chemical
usage
- Reduce risk of environmental non-compliance
- Minimize risk of mechanical damage downstream
- Improve production rate through greater process control
| Performance |
| Number of detector probes |
1 |
| Number of detectors |
18 |
| Detector pitch |
30mm |
| Total measurement range |
510mm (fixed) |
| Update interval |
1 to 15 seconds |
| Power supply |
24vdc |
| Nucleonic source |
low energy(60kev) Am 241 |
| Detector operating temperature |
-20 - +125°C |
|
| Electrical |
| Safety code |
EEx ib IIB T4 (-20°C ≤ Ta ≤ +60°C) |
| Hazardous areas |
Suitable for Zone 1 use in Europe |
| Detector power requirements |
100mA K 10 volts DC from galvanic isolator |
| Power cable |
2-core steel wire braded with inner screen.
32/02 stranding. |
| Signal cable |
4 core fibre optic cable 65/125 Multimode. |
| Output from detector head |
Half duplex using Modbus protocol |
| Detector element |
Geiger Muller ZP1207T |
| Intrinsically safe interfaces |
Galvanic isolator P+F Isolator KFD2-SD-Ex1.10100,
requiring 14-35vdc (24v nominal) 130ma @24vdc |
| PLC |
Allen Bradley FlexLogix Processor. Standard outputs
available: Allen Bradley DF1, and Ethernet. |
|
| Mechanical |
| Dip pipe material |
Grade 2 Titanium, suitable for sour gas service |
| Vessel nozzle |
Suits 3” and greater (3” version uses
a bolt on source
rod) 4” or 6” class 150lb or 300lb Raised
face.
Up to 110bar (PD5500-2000)** |
| Standard design pressure |
IP 66 |
| Enclosure sealing quality |
Tracerco has been evaluated by LRQA and have
been found compliant to EN ISO 9001:2000 |
|
** Higher pressures available upon request
 |
Brochure
A PDF version of the TRACERCO™ PhaseGauge is available,
to download it click
here |
|
